GodHand Blade One Mini GH-PN-95-M Hobby Tool

Small but well cut! Compact small single-blade kniper Blade One-Mini is a small single-blade kniper that is easy to handle for small people. The cutting edge is the same as the blade one-niper of a single-blade kniper standard model, and the cutting edge can be obtained by cutting the surface. Because the thick and short grip fits the palm of the hand, even if you are small, it is difficult to get out when you hold it, and it is easy to handle. Because it has a blade thickness, even if you are not familiar with one-blade kniper, you can use it with peace of mind without worrying about the blade fold. It is possible to cut the gate of hard clear parts and the hot water outlet of the resin kit. Because the blade tip is thinner toward the tip, put the blade firmly on the gate part and cut the parts. It is compact and convenient to carry! With the included cap, you can carry it safely. Cutting capacity Applicable material: plastic (PS resin, PP resin, ABS resin, PE resin), resin kit water mouth. Cutting capacity: Φ3mm or less plastic, but the transparent and translucent PS resin is limited to Φ2mm or less gates. Φ2mm or less Please wear protective glasses for safety. Because there is a possibility of flying a cut, please check that there is no person around it, and check that there is no ile thing. Please do not touch the tip directly. Please do not put the load above the capacity. Please pay attention to the load on the tip. To prevent rust, wipe off dirt and fingerprints and apply oil on the axis and blade. Since moisture is also a factor of rust, please apply the oil carefully when it rains. After using or using, remove the cuts on the blade with a blade brush. If you use the blade or blade root without cutting, it will cause damage or gull. - Do not twist the blade as much as possible during cutting or cutting. - Cut in the middle of the blade. The tip of the blade is easy to fold, so do not cut it with the tip. If the grip is too wide, the spring may be removed. Be careful not to be lost because there is a fly when the spring can be taken. If the spring is removed, please place it again. Do not use it for cutting thick or unsupported material (metal, wood, paper, stone, etc.) beyond cutting capacity. The cap may be changed when wet. Please be careful when storing the ni。. Please keep the case in place where you can not reach a small child.